IV-4/8CH-DX-SN-CD KPD Series Please read instructions thoroughly before operation and retain it for future reference. The image shown above may
FRONT AND REAR PANELS -6- 2.2 Remote Controller To remove the control panel from the DVR and use as a remote controller, switch the lock button to the
CONNECTIONS AND SETUP -7- 2.3 Rear Panel ‧ 16CH (The fan is optional) RISK OF ELECTRIC SHOCK DO NOT OPENDC 19VWARNING : TO REDUCE THE RI SK OF ELE
CONNECTIONS AND SETUP -8- 6) EXTERNAL I/O Insert the supplied 25PIN DSUB to this port for connecting external devices (external alarm, etc). For detai
CONNECTIONS AND SETUP -9- 3. CONNECTIONS AND SETUP (Take 16CH DVR as an example) 3.1 HDD Installation The HDDs must be installed before the DVR is tur
CONNECTIONS AND SETUP -10- 3.3 Power Setup This device should be operated only with the type of power source indicated on the manufacturer’s label. Co
CONNECTIONS AND SETUP -11- 3.6 System Diagram After you finish all the connections and setup, a surveillance system is established and you can experie
BASIC OPERATION -12- 4. BASIC OPERATION (Take 16CH DVR as an example) 4.1 Live Page In this live page of the DVR, you can see the live viewing of 1- /
BASIC OPERATION -13- 4.3 Playback Press the “LATEST” button on the DVR control panel, and the device will playback the latest recorded video. Note: Th
BASIC OPERATION -14- 4.5 Upgrade Note: Do not disconnect the power of your DVR while the upgrade process is in progress, or the DVR functions may not
BASIC OPERATION -15- 3) Search the Record Event by Log on the AP Software Press “ ” (Miscellaneous Control) button to show the miscellaneous control
IMPORTANT SAFEGUARD Graphic Symbol Explanation The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the
MAIN MENU -16- 5. MAIN MENU 5.1 Menu Configuration CHANNEL TITLE EVENT STATUS STATUS IMAGE SIZE QUALITY RECORD IMAGE PER SECOND RECORD TIMER TIMER
QUICK START MENU -17- 6. QUICK START MENU Press (menu) button and enter the password to go to the quick-start menu list. The default admin password
QUICK START MENU -18- 6.2 Manual Record In this menu list, you can set record settings. Move the cursor to icon and you will see the following scree
QUICK START MENU -19- Move the cursor to icon and you will see the following screen: QUICK START CHANNEL TITLE ON EVENT STATUS ON IMAGE SIZE
QUICK START MENU -20- DETECTION TIMER 0 2 4 6 8 10 12 14 16 18 20 22 24 SUN MON TUE
QUICK START MENU -21- The submenu items are described below: 1) DATE Set the current date and time. The default order is “YEAR – MONTH – DATE HOUR
ADVANCED MENU ~22~ 7. ADVANCED MENU (Take 16CH DVR as an example) Press button and enter the password to go to the quick-start menu list. And then m
ADVANCED MENU ~23~ 1) TITLE You can change the default camera naming here. The default title is the channel number. Move the cursor to the camera titl
ADVANCED MENU ~24~ Transparent blocks are the area under detection. Press (enter) button to confirm the start area. Press ◄ / ► button to choo
ADVANCED MENU ~25~ Move the cursor to “ALERT”, and press (enter) button. You will see the following screen: ALERT EXT. ALERT ON INT. BUZZER ON KE
TABLE OF CONTENTS 1. OVERVIEW...
ADVANCED MENU ~26~ The submenu items are described below: ‧ STATIC 1) NETWORK TYPE Select the network type as STATIC and set all the information need
ADVANCED MENU ~27~ Note: The PPPOE function needs to have one “username” and one “password” subscribed from one ISP supplier, and a “DDNS account” to
ADVANCED MENU ~28~ 2) QUAD DWELL DURATION (SEC) Set the quad dwell duration time (3 / 5 / 10 / 15 seconds). 3) FULL SCREEN DWELL DURATION (SEC) Set
ADVANCED MENU ~29~ 7.2 System Info In this menu list, you can check or change some system settings. Move the cursor to “ ” (SYSTEM INFO) icon, you w
ADVANCED MENU ~30~ Note: The DVR will automatically detect and switch to the video system (NTSC / PAL) that is the same as the connected video input d
ADVANCED MENU ~31~ 3) START Move the cursor to “START” and press (enter) button to search and directly playback the recorded files. 7.3.2 HDD Info I
ADVANCED MENU ~32~ Move the cursor to “ ” (BACKUP), and press (enter) button. You will see the following screen: BACKUP USB BACKUP
ADVANCED MENU ~33~ 4) CHANNEL Select channels by pressing (enter) button to change the symbol in front of the channel number. Symbol “ ” means tha
REMOTE OPERATION ~34~ 8. REMOTE OPERATION (Take 16CH DVR as an example) You can also control the DVR remotely via the supplied licensed software AP (h
REMOTE OPERATION ~35~ The default DVR values are as follows: Item Default Value IP address 192.168.1.10 User name admin Password admin Port 80 OR Cl
7.3.3 Event Log ...
REMOTE OPERATION ~36~ To immediately play a recording, select a log from the list, and click “Play” button, or double-click the selected log. Then, t
REMOTE OPERATION ~37~ 8.1.3 AP Control Panel After setting up the network information, login user name and password, double-click “ ” on the PC deskt
REMOTE OPERATION ~38~ 8.1.4 AP Functions Image Display NO. Button Function Description 1 Live / Playback / Download Display Switch If you want to
REMOTE OPERATION ~39~ ((AAddddrreessss BBooookk)) Click to view the pre-defined DVR access details. To log in, choose one IP address from th
REMOTE OPERATION ~40~ 5 Setting Select from the available IP address list, and click this button to edit the setting.6 Refresh Click to update the
REMOTE OPERATION ~41~ Click “ ” to apply the change to the selected channel, or “ ” to apply to all channels. Note: You need to be a supervisor to ope
REMOTE OPERATION ~42~ Manual / Motion / Alarm In this section, you can select which type of the recording will be enabled. There are 3 options: Manua
REMOTE OPERATION ~43~ In “General”, you will see the following items: Item Description Firmware Version Display the current firmware version of your
REMOTE OPERATION ~44~ ‧ To save your changes, click “Apply”. ‧ To define the maximum account creation number, key in the number in “Max User(s)” col
REMOTE OPERATION ~45~ Function Description When everything is ready, choose the “PPPOE” IP type, and key in the user name and password provided by you
OVERVIEW -1- 1. OVERVIEW 1.1 Product Description This MPEG-4 multiplex network DVR series combines remote surveillance, burglar prevention, and eviden
REMOTE OPERATION ~46~ Video In “Video”, you can set the video web transmission size and quality, and the frame rate for transmitting. Function Desc
REMOTE OPERATION ~47~ Camera In “Dvr” → “Camera”, you can specify a channel to enable the recording function by selecting the check box “Record”, c
REMOTE OPERATION ~48~ Function Description RE “Reference”, is to set a reference for detection. The default value is 10, which means the DVR will comp
REMOTE OPERATION ~49~ ‧ Routine / Motion Click “Routine” tab to select the time range for continuous recording, or “Motion” tab to select the time ra
REMOTE OPERATION ~50~ Function Description Title Select to display the channel title in the live view. Event Select to display the event symbol in t
REMOTE OPERATION ~51~ c). To start upgrading the DVR firmware, choose the file from the firmware list, and click “Update Firmware” to start the upgrad
REMOTE OPERATION ~52~ b) Click “Add” to locate and select the graphic file. The file will be shown in the list. If you add the wrong file, select it a
REMOTE OPERATION ~53~ ‧ Condition Button / Function Description Date Selection (From / To) Choose the specific date range including the event / rec
REMOTE OPERATION ~54~ Button Description Query This button is effective when “Condition” is selected. Delete / Delete All Click to remove the unnece
REMOTE OPERATION ~55~ Backup Select “All” to show all download logs, or “Condition” to search for the specific log(s) by date. ‧ All Button Des
OVERVIEW -2- 1.3 Specifications MODEL 16CH 8CH 4CH Video System NTSC / PAL (auto detection) Video Compression Format MPEG-4 Video Input (Composit
REMOTE OPERATION ~56~ Button / Function Description Date Selection (From / To) Choose the specific date range including the event / record logs you m
REMOTE OPERATION ~57~ DVR Control When the AP is connected to the DVR, this DVR control panel will be enabled, and you can control the DVR remotely
REMOTE OPERATION ~58~ NO. Function Description 3 Digital Zoom Click to zoom in / out the selected channel image. 4 Full Sequence / Quad Sequence Q
REMOTE OPERATION ~59~ 8.2 IE Web Browser You can view the images or operate your DVR with IE web browser. Note: The supported PC operation systems a
REMOTE OPERATION ~60~ NO. Function Description 5 Enter Press to confirm the setting or enter your selection. 6 Digital Zoom Press to zoom in / o
REMOTE OPERATION ~61~ 8.3 QuickTime Player You can also use the QuickTime player to remotely log into the DVR and check the live view only. Note: Qu
APPENDIX 1 PIN CONFIGURATION ~62~ APPENDIX 1 PIN CONFIGURATION ‧ For 16CH DVR Siren: When the DVR is triggered by alarm or motion, the COM connects w
APPENDIX 1 PIN CONFIGURATION ~63~ ‧ For 8CH DVR Siren: When the DVR is triggered by alarm or motion, the COM connects with NO and the siren with str
APPENDIX 1 PIN CONFIGURATION ~64~ ‧ For 4CH DVR Siren: When the DVR is triggered by alarm or motion, the COM connects with NO and the siren with str
APPENDIX 2 COMPATIBLE USB FLASH DRIVE BRAND ~65~ APPENDIX 2 COMPATIBLE USB FLASH DRIVE BRAND Please upgrade the firmware of the DVR to the latest vers
FRONT AND REAR PANELS -3- 2. FRONT AND REAR PANELS ‧ 16CH ‧ 8CH ‧ 4CH LIVE1234567890ABLIST LATESTPLAYSLOWSTO P 2.1 Front Panel 1) LED Indication
APPENDIX 3 COMPATIBLE HDD BRAND ~66~ APPENDIX 3 COMPATIBLE HDD BRAND Please upgrade the firmware of the DVR to the latest version to ensure the accura
APPENDIX 4 RECORDING TIME TABLE ~67~ APPENDIX 4 RECORDING TIME TABLE The recording time varies depending on the following factors: ‧ Different camera
APPENDIX 5 TROUBLESHOOTING ~68~ APPENDIX 5 TROUBLESHOOTING Please refer to the table below for easy troubleshooting. The table describes some typical
APPENDIX 6 DEFAULT VALUE ~69~ APPENDIX 6 DEFAULT VALUE ‧ Default Value Items Default Value ‧ DVR Side: ADMIN Password 0000 Channel Title Display
FRONT AND REAR PANELS -4- 5) (Menu) Press this button to enter / exit the quick start menu. In the sub-layer of the advanced setting menu, press th
FRONT AND REAR PANELS -5- 11) / Use these two buttons to select the live or playback sound of the audio channels. Icon “ ” means: Live audio o
Komentáře k této Příručce